platinum smd flat chip temperature sensor pts series - pt-sensors vishay beyschlag www.vishay.com for technical questions, contact: nlr@vishay.com document number: 28762 8 revision: 06-may-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 pts smd flat chip temperat ure sensors are the perfect choice for temperature control of electronics operating under varying environmental conditions. the highly controlled platinum thin film manufacturing process guarantees an outstanding stability of temperature characteristics which ensures reliable operation even under harsh conditions. typical applications include automotive, aviation and industrial electronics. features ? standardized characteristics according to iec 60751 ? advanced thin film technology ? short reaction times down to t 0.9 ? 2 s (in air) ? outstanding stabilit y of temperature characteristic ? standard smd sizes ? supports lead (pb)-free soldering ? compliant to rohs directive 2002/95/ec applications temperature measurement in ? automotive electronics ? aviation electronics ? industrial electronics notes (1) valid for sensor element only (2) indicated measurement currents can be applied conti nuously with self-heating e ffect of less then 0.1 c technical specifications description pts 0603 pts 0805 pts 1206 resistance values r 0 at 0 c 100 ? 100 ? , 500 ? 100 ? , 500 ? , 1000 ? temperature coefficient (0 c ... + 100 c) + 3850 ppm/k tolerance classes f0.3, f0.6 operating temperature range - 55 c to + 155 c long term stability ? r 0 / r 0 ; r 0 change after 1000 h at + 155 c < 0.04 % insulation resistance > 10 m ? measurement current i meas. (dc) (2) 100 ? 0.1 ma to 0.50 ma 0.1 ma to 1.0 ma 0.1 ma to 1.0 ma 500 ? - 0.1 ma to 0.40 ma 0.1 ma to 0.40 ma 1000 ? - - 0.1 ma to 0.25 ma self-heating (1) still air (v = 0 m/s) ? 0.9 k/mw ? 0.8 k/mw ? 0.7 k/mw thermal response time (1) flowing water (v = 0.4 m/s) t 0.5 ? 0.1 s t 0.5 ? 0.2 s t 0.5 ? 0.3 s t 0.9 ? 0.2 s t 0.9 ? 0.3 s t 0.9 ? 0.4 s flowing air (v = 3.0 m/s) t 0.5 ? 1.0 s t 0.5 ? 1.5 s t 0.5 ? 2.0 s t 0.9 ? 2.0 s t 0.9 ? 3.0 s t 0.9 ? 5.0 s
document number: 28762 for technical questions, contact: nlr@vishay.com www.vishay.com revision: 06-may-11 9 pts series - pt-sensors platinum smd flat chip temperature sensor vishay beyschlag this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters production production is strictly controlled and follows an extensive set of instructions established for reproducibility. a homogeneous film of platinum is deposited on a high grade ceramic body (96 % ai 2 o 3 ). the sensor-elements are covered by a protective coating designed for electrical, mechanical and climatic protec tion. the terminations receive a final pure tin on nickel plating. quality the result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual sensors. only accepted products are laid directly into the paper tape in accordance with iec 60286-3 . storage solderability is specified for 2 years after production or re-qualification. the permitt ed storage time is 2 years. assembly the pt-sensors are suitable for processing on automatic smd assembly systems. they are suitable for automatic soldering using wave, reflow or vapour phase. the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous so lutions. the pt-sensors are rohs compliant, the pure tin plating provides compatibility with lead (pb)-free and lead-containing soldering processes. the immunity of the plating against tin whisker growth has been proven under extensive testing. all products comply with the cefic-eeca-eicta list of legal restrictions on hazardous substances. this includes full compatibility with the following directives: ? 2000/53/ec end of vehicle life directive (elv) ? 2000/53/ec annex ii to end of vehicle life directive (elv ii) ? 2002/95/ec restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) approvals the pt-sensors ar e tested in accordance with iec 60751 and iec 60068 series. t 2 t 1 l h w w t dimensions - pts sensor types, mass and relevant physical dimensions type h l w w t t 1 t 2 mass (mg) pts 0603 0.45 + 0.1/- 0.05 1.55 0.05 0.85 0.1 > 75 % of w 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 pts 0805 0.45 + 0.1/- 0.05 2.0 0.1 1.25 0.15 > 75 % of w 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6 pts 1206 0.55 0.1 3.2 + 0.1/- 0.2 1.6 0.15 > 75 % of w 0.5 0.25 0.5 0.25 9.2
www.vishay.com for technical questions, contact: nlr@vishay.com document number: 28762 10 revision: 06-may-11 pts series - pt-sensors vishay beyschlag platinum smd flat chip temperature sensor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) products can be ordered using either t he part number or the product description (2) the part number is shown to facilitate the introduction of a unified part numbering system (2) please refer to table packaging (4) we recommend that the production desc ription is used to minimi ze the possibility of e rrors in order handling part number and product description (1) part number (2) : pts060301b100rp100 type size code special character tolerance class resistance value packaging (3) special 3 digits pts = platinum temperature sensor smd 4 digits 0603 0805 1206 1 digit 0 = neutral 2 digits 1b = class f0.3 2b = class f0.6 4 digits 100r = 100 ? 500r = 500 ? 1k00 = 1000 ? 2 digits pu p1 2 digits 00 = standard product description (4) : pts 0603-b p1 100r pts 0603 -b p1 100r type size code tolerance class packaging (3) resistance value pts = platinum temperature sensor smd 0603 0805 1206 b = class f0.3 2b = class f0.6 pu p1 100r = 100 ? 500r = 500 ? 1k = 1000 ? packaging model diameter pieces code box/reel pts 0603 114 mm 100 pu box 180 mm/7" 1000 p1 reel pts 0805 114 mm 100 pu box 180 mm/7" 1000 p1 reel pts 1206 114 mm 100 pu box 180 mm/7" 1000 p1 reel 06 s t p031b100rp100 0
document number: 28762 for technical questions, contact: nlr@vishay.com www.vishay.com revision: 06-may-11 11 pts series - pt-sensors platinum smd flat chip temperature sensor vishay beyschlag this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional performance the temperature resistance re lationships of the pts series follow different equations: for the temperature range of - 55 c up to 0 c: r t ? =r 0 x (1 + a x t ? + b x t 2 ? + c x ( t ? - 100 c) x t 3 ) and for the temperature range of 0 c up to + 155 c: r t ? = r 0 x (1 + a x t + b ? x t 2 ) r t : resistance as a func tion of temperature r 0 : nominal resistance value at 0 c t : temperature in c coefficients according to iec 60751: a = 3.9083 x 10 -3 c -1 b = - 5.775 x 10 -7 c -2 c = - 4.183 x 10 -12 c -4 the tolerances values of the pts series are classified by the following equations as specified by iec 60751: class f0.3: ? t f0.3 ? (0.30 + 0.005 x ? ? t ?? class f0.6: ? t f0.6 ? (0.60 + 0.010 x ? ? t ?? nominal resistance value temperature r/r 0 ratio nominal resistance values class f0.3 class f0.6 r 0 100 ? r 0 500 ? r 0 1000 ? t tol. t tol. (c) ( ? )( ? )( ? )(c)(c) - 55 0.78319 78.32 391.59 783.19 0.58 1.15 - 50 0.80306 80.31 401.53 803.06 0.55 1.10 - 45 0.82290 82.29 411.45 822.90 0.53 1.05 - 40 0.84271 84.27 421.35 842.71 0.50 1.00 - 35 0.86248 86.25 431.24 862.48 0.48 0.95 - 30 0.88222 88.22 441.11 882.22 0.45 0.90 - 25 0.90192 90.19 450.96 901.92 0.43 0.85 - 20 0.92160 92.16 460.80 921.60 0.40 0.80 - 15 0.94124 94.12 470.62 941.24 0.38 0.75 - 10 0.96086 96.09 480.43 960.86 0.35 0.70 - 5 0.98044 98.04 490.22 980.44 0.33 0.65 0 1.00000 100.00 500.00 1000.00 0.30 0.60 5 1.01953 101.95 509.76 1019.53 0.33 0.65 10 1.03903 103.90 519.51 1039.03 0.35 0.70 15 1.05849 105.85 529.25 1058.49 0.38 0.75 20 1.07794 107.79 538.97 1077.94 0.40 0.80 25 1.09735 109.73 548.67 1097.35 0.43 0.85 30 1.11673 111.67 558.36 1116.73 0.45 0.90 35 1.13608 113.61 568.04 1136.08 0.48 0.95 40 1.15541 115.54 577.70 1155.41 0.50 1.00 45 1.17470 117.47 587.35 1174.70 0.53 1.05 50 1.19397 119.40 596.99 1193.97 0.55 1.10 55 1.21321 121.32 606.60 1213.21 0.58 1.15 60 1.23242 123.24 616.21 1232.42 0.60 1.20 65 1.25160 125.16 625.80 1251.60 0.63 1.25 70 1.27075 127.08 635.38 1270.75 0.65 1.30 75 1.28987 128.99 644.94 1289.87 0.68 1.35 80 1.30897 130.90 654.48 1308.97 0.70 1.40 85 1.32803 132.80 664.02 1328.03 0.73 1.45 90 1.34707 134.71 673.53 1347.07 0.75 1.50 95 1.36608 136.61 683.04 1366.08 0.78 1.55 100 1.38506 138.51 692.53 1385.06 0.80 1.60 105 1.40400 140.40 702.00 1404.00 0.83 1.65 110 1.42293 142.29 711.46 1422.93 0.85 1.70 115 1.44182 144.18 720.91 1441.82 0.88 1.75 120 1.46068 146.07 730.34 1460.68 0.90 1.80 125 1.47951 147.95 739.76 1479.51 0.93 1.85 130 1.49832 149.83 749.16 1498.32 0.95 1.90 135 1.51710 151.71 758.55 1517.10 0.98 1.95 140 1.53584 153.58 767.92 1535.84 1.00 2.00 145 1.55456 155.46 777.28 1554.56 1.03 2.05 150 1.57325 157.33 786.63 1573.25 1.05 2.10 155 1.59191 159.19 795.96 1591.91 1.08 2.15
www.vishay.com for technical questions, contact: nlr@vishay.com document number: 28762 12 revision: 06-may-11 pts series - pt-sensors vishay beyschlag platinum smd flat chip temperature sensor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 - 75 0 175 0.60 temperature in c - 50 - 25 25 50 75 100 125 150 0. 8 0 1.00 1.20 1.40 1.60 1.70 r / r 0 ratio r / r 0 0.70 0.90 1.10 1.30 1.50 pts series - 75 0 175 temperature tol. in c temperature in c - 50 - 25 25 50 75 100 125 150 0.0 0.1 1.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 1.0 1.1 0.2 tolerances for classf0.3 r 0 tol. in % 0.00 0.05 0.60 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.10 temp. tol. r 0 tol. - 75 0 175 temperature tol. in c temperature in c - 50 - 25 25 50 75 100 125 150 0.0 0.2 2.4 0.6 0. 8 1.0 1.2 1.4 1.6 1. 8 2.0 2.2 0.4 tolerances for classf0.6 r 0 tol. in % 0.0 0.1 1.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 1.0 1.1 0.2 temp. tol. r 0 tol.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
